Aluminum 6061-T6511 Rectangular Bar, 0.125" Thick, 4" Width, 36" Length

Aluminum 6061-T6511 Rectangular Bar, 0.125" Thick, 4" Width, 36" Length Reviews

Other Picture

Aluminum 6061-T6511 Rectangular Bar, 0.125" Thick, 4" Width, 36" Length Feature

• Excellent corrosion resistance
• Versatile for medium to high strength requirements
• Use for transportation components, recreation products, machinery and equipment
• Good finishing characteristics
• Min 38 ksi tensile strength

Aluminum 6061 is one of the most widely used alloys in the 6000 series. This standard structural alloy, one of the most versatile of the heat-treatable alloys, is popular for medium to high strength requirements and has good toughness characteristics. Alloy 6061 has excellent corrosion resistance to atmospheric conditions and good corrosion resistance to seawater. This alloy also offers good finishing characteristics and responds well to anodizing; however, where cosmetic appearance is critical, consider the use of alloy 6063. For screw machine applications, alloy 6061 has adequate machinability characteristics in the heat-treated -T6/-T6511 condition. Chips from machining (particularly turning and drilling) can be difficult to break in the -T6/-T6511 temper condition. Chip breakers are recommended, and special machining techniques (i.e. peck drilling) can improve chip formation.

Visit Store Now !!

Detail Products

• Aluminum 6063-T52 Rectangular Bar, 0.5" Thick, 0.75" Width, 36" Length
• Aluminum 6063-T52 U-Channel, 0.125" Thick, 1" Width, 0.75" Leg Length, 36" Length
• Aluminum 6061-T6511 Round Rod, 1.375" OD, 36" Length
• Aluminum 6061-T6511 Square Bar, 2.25" Thick, 2.25" Width, 36" Length
• Aluminum 6061-T6 Rectangular Bar, ASTM B221, 1/4" Thick, 2-1/2" Width, 12" Length

Detail Reviews

Oct 23, 2011 10:07:04

Aluminum 6061 Rectangular Bar, 6" Thick, 1/2" Width, 36" Length

Aluminum 6061 Rectangular Bar, 6" Thick, 1/2" Width, 36" Length Reviews

Other Picture

Aluminum 6061 Rectangular Bar, 6" Thick, 1/2" Width, 36" Length Feature

• Provides excellent joining characteristics and good acceptance of applied coatings
• Combines relatively high strength, good workability and high resistance to corrosion
• Excellent welding capabilities

Admired for its lightweight, high strength to weight ratio, high corrosion resistance, high thermal and electrical conductivity, and ease of machinability, aluminum is often referred to as the wonder metal and is considered the ideal material choice for a variety of today's critical applications.

Visit Store Now !!

Detail Products

Detail Reviews

Oct 22, 2011 08:49:12

Chromium Steel Ball, Grade 25, 3/8" Diameter (Pack of 100)

Chromium Steel Ball, Grade 25, 3/8" Diameter (Pack of 100) Reviews

Other Picture

Chromium Steel Ball, Grade 25, 3/8" Diameter (Pack of 100) Feature

• Sphericity: 0.000024 inches
• Specific Gravity: 7.833
• Rockwell C: 60-67
• Grade 24
• High Precision
• Anti-Rust Liquid Applied

Chrome Steel AISI 52100 metal balls have high hardness, excellent wear resistance, and are used in precision bearings and accurate valve applications.

Visit Store Now !!

Detail Products

• Stainless Steel 440C Ball, Grade 100, 1/2" Diameter (Pack of 10)
• Brass C260 Ball, Grade 200, 3/4" Diameter (Pack of 1)
• Rothco 550lb. Type III Nylon Paracord
• Parachute Cord Nylon 7 Strand 550lb Tested U.S MADE 100'
• Nylon Military Paracord 550 lbs Type III 7 Strand Utility Cord Rope 100 Feet

Detail Reviews

Oct 15, 2011 19:33:05

Carbon Steel 1018 Rectangular Bar, 3-1/2" Thick, 5" Width, 36" Length

Carbon Steel 1018 Rectangular Bar, 3-1/2" Thick, 5" Width, 36" Length Reviews

Other Picture

Carbon Steel 1018 Rectangular Bar, 3-1/2" Thick, 5" Width, 36" Length Feature

• Carbon steel is more commonly used than any other metal, and has long been admired for its versatility and low cost
• Our carbon steel comes in an extraordinary range of grades and sizes in bar, plate, and tube
• Excellent quality for welding

Our Carbon Steel bars and tubing are a general purpose low carbon steel with good case hardening qualities. Especially suited to cold forming, bending and welding operations.

Visit Store Now !!

Detail Products

Detail Reviews

Oct 10, 2011 20:05:25

Stainless Steel 304 Wire, Straightened, Precision Ground, ASTM A313, 0.149" Diameter, 60" Length (Pack of 5)

Stainless Steel 304 Wire, Straightened, Precision Ground, ASTM A313, 0.149" Diameter, 60" Length (Pack of 5) Reviews

Other Picture

Stainless Steel 304 Wire, Straightened, Precision Ground, ASTM A313, 0.149" Diameter, 60" Length (Pack of 5) Feature

• ASTM A313
• Spring Temper
• Straightened

Stainless Steel Type 304V Wire (ASTM A313) is spring tempered, drawn, straightened, cut and cleaned with a bright finish.It is used for dental wire, stylets, guide wires and catheter wires. NOTE: When ordering wire, always specify exact dimensions in decimals. Stating gauge sizes can lead to confusion, since wire diameters may conform to various gauging systems. Hypodermic Tubing gauges are based on the Birmingham Gage, also known as Stub's Iron Wire Gage.

Visit Store Now !!

Detail Products

Detail Reviews

Oct 09, 2011 18:15:05

Brass C260 H-Beam, Precision, ASTM-B16, 0.018" Thick, 3/32" Width, 3/32" Height, 36" Length (Pack of 3)

Brass C260 H-Beam, Precision, ASTM-B16, 0.018" Thick, 3/32" Width, 3/32" Height, 36" Length (Pack of 3) Reviews

Other Picture

Brass C260 H-Beam, Precision, ASTM-B16, 0.018" Thick, 3/32" Width, 3/32" Height, 36" Length (Pack of 3) Feature

• Precision Milled H Beams
• Milled from 1/2 - 3/4 hard
• C260 Brass
• Malleable
• Easily Soldered and Brazed

Precision Milled Brass C260 Profiles are 70 percent copper and 30 percent zinc. This is one of the most widely used of the copper-zinc alloys; it is malleable and ductile; has excellent cold-working; poor hot working and poor machining properties; develops high tensile strength with cold-working. Rated excellent for soft-soldering; good for silver alloy brazing or oxyacetylene welding and fair for resistance of carbon arc welding. Used for miniature profiles, drawn cartridges, tubes, eyelet machine items and snap fasteners. 1/2 to 3/4 Hard

Visit Store Now !!

Detail Products

Detail Reviews

Oct 08, 2011 18:46:18

Plain Steel Mesh Sheet, ASTM E2016-06, 24 X 24 Mesh Size, 44.2% Open Area, 0.014" Wire Diameter, 12" Width, 12" Length

Plain Steel Mesh Sheet, ASTM E2016-06, 24 X 24 Mesh Size, 44.2% Open Area, 0.014" Wire Diameter, 12" Width, 12" Length Reviews

Other Picture

Plain Steel Mesh Sheet, ASTM E2016-06, 24 X 24 Mesh Size, 44.2% Open Area, 0.014" Wire Diameter, 12" Width, 12" Length Feature

• Low-cost steel can be used in countless applications

Because carbon steel is susceptible to corrosion, it is best when used in unexposed applications or protected with paint or a powder coating

Visit Store Now !!

Detail Products

Detail Reviews

Oct 04, 2011 22:08:51